MSOH is on but nothing is routed to it

MSOH is on but nothing is routed to it

An MSOH pool needs a base. If you turn MSOH on and route nothing to it, Rate Studio warns you.

How to fix it

  1. On Configure Structures, open the overhead pool's routing table (see How do I route materials, subcontracts, travel and ODC?).
  2. Route the costs that belong in MSOH to MSOH. Materials and subcontracts are always in the MSOH base when routed there.
  3. Travel and other direct costs can go to MSOH only after you enable them as optional MSOH base elements in the MSOH section.
  4. If you don't want MSOH, choose No on the MSOH card.

If you turn MSOH off

Costs recorded as MSOH default to G&A, or you can treat them as overhead in one of the structure's pools. If MSOH accounts remain in your data, a red message may appear (see 'Cost data not used by this structure' red message).

If this doesn't work: see Should I use an MSOH pool? for how MSOH works.

Watch: MSOH and G&A, routing and optional elements from 1:06

Full guide section: Configure Structures

Related: How do I route materials, subcontracts, travel and ODC? | Should I use an MSOH pool? | 'Cost data not used by this structure' red message