How do I add alternative structures to compare?

How do I add alternative structures to compare?

Choose Model Multiple Rate Structures on Mode & Purpose, then add and name your alternatives on Define Structures. In this mode the dollars are locked: you enter cost data once and only the structure changes, so any difference in rates has one cause.

Steps

  1. On Mode & Purpose, choose Model Multiple Rate Structures.
  2. On Define Structures, choose how many alternatives to compare in addition to the Baseline.
  3. Name each structure so it says what it is, for example "Split OH by Division" or "Add IT Pool." The names appear on every tab, table and report from here on.
  4. On Configure Structures, set up the Baseline first. Each structure has its own tab.
  5. On an alternative's tab, choose Copy structure from another version. Copying is the fastest way to start, because you change only what you want to test.
  6. Change one thing per alternative. For example, one alternative turns MSOH off so materials and subcontracts go straight to G&A, and another keeps MSOH but routes materials into the overhead base.

How many pools a structure may have depends on your plan (see What are my plan limits? (tiers vs. editions)). If a structure is over the limit, Rate Studio tells you before you continue.

If this doesn't work: if the Multiple Structures mode is unavailable, see A mode or option is unavailable on my plan.

Watch: Add alternative structures, from 0:39

Full guide section: Mode & Purpose and Structures

Related: How do I compare structures side by side? | How do per-structure routing and overrides work? | What are my plan limits? (tiers vs. editions)